SMOKE GRENADE TURN SIGNAL LIGHT KITS ALL BIKES

  • Sale
  • Regular price $165.00
Shipping calculated at checkout.


SEQUENTIAL TURN SIGNAL KIT FOR SUPER73 OR ANY BIKE 

These lights move in a sequence from in to outside, creating motion that makes your bike very visible when turning. Smoked lense. Grenade style casing. Bright flowing amber turn signal! We cannot emphasize how much safer you will be and  feel with working turn signals! Works directly with RX or S2 Super73 (you may need mounts to install on the front). There is a battery kit for all others.

PLUG AND PLAY KIT FOR SUPER73 S-2 and RX 

This kit includes a splitter to be plugged into your 3-pin headlight or brake light connector. The stock brake will plug in to one side of the splitter and the turn signals will plug in to the other side of the splitter. Signals will only operate when the headlight is on.

Includes:

  • Front and back sequential signals and wiring
  • Handlebar switch.
  • Zip ties

Because this is a 12 volt light system, it only works with an ebike that has a 12 volt converter such as the S-2, RX. If you want to add a converter to your ebike, we sell them here. Otherwise, choose battery package below:

BATTERY TURN SIGNAL KIT (ALL BIKES)

Fits any electric bike or bicycle. Mount battery box to water bottle cage.

  • 6000ah battery
  • FRONT and REAR Turn Signals
  • Pre-made wiring harness.
  • Turn Signal Switch for Handlebar

The switch mounted on the handlebars functions : up is right and down would be left.

We do NOT ship batteries outside the continental USA. Contact us if you want to order a kit without a battery.

SIMPLE INSTRUCTIONS FOR THIS KIT:

1. Attach the bolt-on battery box where desired. Mounts to water cage area or similar M5 tap out locations on most bikes. Use the two small holes in front of the bike to insert an allen wrench. Use the long holes to insert two small M5 bolts and attach box to frame.

2. Plug connection into battery.

3. install turn signals where desired and connect to battery connector (Yellow Plug Ends).

4. Zip tie wiring to frame. IMPORTANT: do not allow wires to hang or dangle where they can be caught in moving parts!

5. Install turn signal switch where desired on handlebars. Conventional arrangement is up/top/forward facing position = right turn and vis versa.

6. Power battery on and test! Signals will display more rightly with a full charge.

Enjoy!

MOUNTING  OPTIONS FOR TURN SIGNALS

If you have and R, RX, S2, ZX the rear kit fits the gusset on your bike.

If you have an RX with the stock headlight and headlight fairing the front & rear signals fit your bike.

If you have an R, S2 or ZX with an aftermarket headlight that uses fork mounting brackets with holes, the front & rear kit work with your bike.

No mounting brackets included, the lights are intended to mount on existing headlight hardware and rear hole cut outs for models listed. To mount on the forks of an S2, you can purchase our #2 Bracket for mounting turn signals to forks. If you want to lower the position to the forks on the RX, purchase the #1 Bracket. These will also mount easily on MER panniers for Super73 S-2, the MER RX or S2 racks, or our custom aluminum fairings!

Indicators are powered by a 6000mAh battery. The switch mounted on the handlebars functions : up is right and down would be left.

We do NOT ship batteries outside the continental USA. Contact us if you want to order a kit without a battery.